Error report for Modelica.Fluid.Examples.TraceSubstances.RoomCO2

Error: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\Fluid\Interfaces.mo':
Semantic error at line 564, column 9:
Circularity in binding expression of parameter: volume.T_start = if use_T_start then system.T_start else Medium.temperature_phX(p_start, h_start, X_start)
Error: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\Fluid\Interfaces.mo':
Semantic error at line 568, column 9:
Circularity in binding expression of parameter: volume.h_start = if use_T_start then Medium.specificEnthalpy_pTX(p_start, T_start, X_start) else Medium.h_default
Error: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\Fluid\Pipes.mo':
Semantic error at line 1248, column 54:
Circularity in binding expression of parameter: pipe.flowModel.m_flow_small = if system.use_eps_Re then system.eps_m_flow * m_flow_nominal else system.m_flow_small
Error: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\Fluid\Pipes.mo':
Semantic error at line 1545, column 26:
Circularity in binding expression of parameter: pipe.flowModel.m_flow_nominal = if system.use_eps_Re then system.m_flow_nominal else 100.0 * m_flow_small
Error: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\Fluid\Sensors.mo':
Semantic error at line 552, column 14:
Array index out of bounds: 0, index expression: ind
Error: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\Fluid\Vessels.mo':
Semantic error at line 290, column 39:
Array size mismatch in declaration of portsData_diameter_internal, size of declaration is [2] and size of binding expression is [0]
Error: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\Fluid\Vessels.mo':
Semantic error at line 291, column 82:
Array size mismatch in declaration of portsData_height_internal, size of declaration is [2] and size of binding expression is [0]
Error: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\Fluid\Vessels.mo':
Semantic error at line 292, column 83:
Array size mismatch in declaration of portsData_zeta_in_internal, size of declaration is [2] and size of binding expression is [0]
Error: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\Fluid\Vessels.mo':
Semantic error at line 293, column 84:
Array size mismatch in declaration of portsData_zeta_out_internal, size of declaration is [2] and size of binding expression is [0]
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\Fluid\Pipes.mo':
At line 1242, column 75:
The parameter pipe.flowModel.dp_nominal does not have a binding expression
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\Fluid\Pipes.mo':
At line 1252, column 15:
The parameter pipe.flowModel.dp_small does not have a binding expression
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\Fluid\Sensors.mo':
At line 527, column 44:
String parameters are only partially supported
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\Fluid\Sensors.mo':
At line 534, column 11:
The parameter traceSource.ind does not have a binding expression
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\Fluid\Sensors.mo':
At line 534, column 11:
The parameter traceVolume.ind does not have a binding expression
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\Fluid\Sources.mo':
At line 794, column 14:
The cardinality() function-like operator is deprecated, and will be removed in a future version of Modelica
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\Fluid\Sources.mo':
At line 849, column 14:
The cardinality() function-like operator is deprecated, and will be removed in a future version of Modelica
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\Fluid\Utilities.mo':
At line 7, column 36:
String arguments in functions are only partially supported
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\Fluid\Utilities.mo':
At line 8, column 28:
String arguments in functions are only partially supported
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\Fluid\Utilities.mo':
At line 12, column 29:
String arguments in functions are only partially supported
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\Fluid\Utilities.mo':
At line 15, column 36:
String arguments in functions are only partially supported
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\Fluid\Vessels.mo':
At line 310, column 18:
The cardinality() function-like operator is deprecated, and will be removed in a future version of Modelica
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\Fluid\Vessels.mo':
At line 549, column 40:
The parameter volume.portsData[0,0].diameter does not have a binding expression
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\Media\Air\MoistAir.mo':
At line 11, column 18:
Assuming 'each' for the attribute min
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\Media\Air\MoistAir.mo':
At line 11, column 26:
Assuming 'each' for the attribute max
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\Media\IdealGases\Common\package.mo':
At line 8, column 32:
String arguments in functions are only partially supported
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\Media\IdealGases\Common\package.mo':
At line 8, column 32:
String parameters are only partially supported
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\Media\package.mo':
At line 4329, column 64:
String parameters are only partially supported
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\Media\package.mo':
At line 4330, column 76:
String parameters are only partially supported
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\Media\package.mo':
At line 4332, column 96:
String parameters are only partially supported
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\SIunits.mo':
At line 988, column 22:
Assuming 'each' for the attribute quantity
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\SIunits.mo':
At line 988, column 46:
Assuming 'each' for the attribute unit
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\SIunits.mo':
At line 1042, column 23:
Assuming 'each' for the attribute quantity
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\SIunits.mo':
At line 1043, column 31:
Assuming 'each' for the attribute unit
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\SIunits.mo':
At line 1044, column 25:
Assuming 'each' for the attribute displayUnit
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\SIunits.mo':
At line 1045, column 26:
Assuming 'each' for the attribute min
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\SIunits.mo':
At line 1083, column 24:
Assuming 'each' for the attribute quantity
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\SIunits.mo':
At line 1084, column 32:
Assuming 'each' for the attribute unit
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\SIunits.mo':
At line 1085, column 22:
Assuming 'each' for the attribute displayUnit
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\SIunits.mo':
At line 1087, column 36:
Assuming 'each' for the attribute min
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\SIunits.mo':
At line 1087, column 44:
Assuming 'each' for the attribute nominal
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\SIunits.mo':
At line 1106, column 32:
Assuming 'each' for the attribute quantity
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\SIunits.mo':
At line 1107, column 40:
Assuming 'each' for the attribute unit
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\SIunits.mo':
At line 1108, column 24:
Assuming 'each' for the attribute min
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\SIunits.mo':
At line 1122, column 32:
Assuming 'each' for the attribute quantity
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\SIunits.mo':
At line 1122, column 66:
Assuming 'each' for the attribute unit
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\SIunits.mo':
At line 1128, column 28:
Assuming 'each' for the attribute quantity
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\SIunits.mo':
At line 1128, column 52:
Assuming 'each' for the attribute unit
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\SIunits.mo':
At line 1137, column 40:
Assuming 'each' for the attribute quantity
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\SIunits.mo':
At line 1138, column 48:
Assuming 'each' for the attribute unit
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\SIunits.mo':
At line 1139, column 21:
Assuming 'each' for the attribute min
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\SIunits.mo':
At line 1140, column 16:
Assuming 'each' for the attribute start
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\SIunits.mo':
At line 1141, column 21:
Assuming 'each' for the attribute nominal
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\SIunits.mo':
At line 1142, column 20:
Assuming 'each' for the attribute displayUnit
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\SIunits.mo':
At line 1204, column 30:
Assuming 'each' for the attribute quantity
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\SIunits.mo':
At line 1204, column 62:
Assuming 'each' for the attribute unit
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\SIunits.mo':
At line 1486, column 28:
Assuming 'each' for the attribute quantity
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\SIunits.mo':
At line 1486, column 58:
Assuming 'each' for the attribute unit
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\SIunits.mo':
At line 1486, column 74:
Assuming 'each' for the attribute min
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\SIunits.mo':
At line 1487, column 34:
Assuming 'each' for the attribute max
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\Utilities\Streams.mo':
At line 126, column 36:
String arguments in functions are only partially supported
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\Utilities\Strings.mo':
At line 85, column 36:
String arguments in functions are only partially supported
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\Utilities\Strings.mo':
At line 86, column 25:
String arguments in functions are only partially supported
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\Utilities\Strings.mo':
At line 116, column 36:
String arguments in functions are only partially supported
Warning: in file 'C:\JModelica.org-1.14\install\ThirdParty\MSL\Modelica\Utilities\Strings.mo':
At line 117, column 25:
String arguments in functions are only partially supported

9 errors, 0 compliance and 55 warnings